Articles citing this paper
3D-Printable Biodegradable Polyester Tissue Scaffolds for Cell Adhesion
Justin M. Sirrine A , Allison M. Pekkanen B , Ashley M. Nelson A , Nicholas A. Chartrain C , Christopher B. Williams D and Timothy E. Long A B E
+ Author Affiliations
- Author Affiliations
A Department of Chemistry, Macromolecules and Interfaces Institute, Virginia Tech, Blacksburg, VA 24061, USA.
B School of Biomedical Engineering and Sciences, Virginia Tech, Blacksburg, VA 24061, USA.
C Department of Materials Science and Engineering, Virginia Tech, Blacksburg, VA 24061, USA.
D Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA 24061, USA.
E Corresponding author. Email: telong@vt.edu
Australian Journal of Chemistry 68(9) 1409-1414 https://doi.org/10.1071/CH15327
Submitted: 6 June 2015 Accepted: 7 July 2015 Published: 4 August 2015
17 articles found in Crossref database.
Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds
Mondschein Ryan J.,
Kanitkar Akanksha,
Williams Christopher B.,
Verbridge Scott S., Long Timothy E.
Biomaterials. 2017 140 p.170
Human plasma gels: Their preparation and rheological characterization for cell culture applications in tissue engineering
Barreda Lucía,
Marcet Ismael,
Llames Sara,
Pevida Marta,
García-Pérez Eva,
Meana Álvaro,
Rendueles Manuel, Díaz Mario
Journal of the Mechanical Behavior of Biomedical Materials. 2019 89 p.107
3D Printing All‐Aromatic Polyimides using Mask‐Projection Stereolithography: Processing the Nonprocessable
Hegde Maruti,
Meenakshisundaram Viswanath,
Chartrain Nicholas,
Sekhar Susheel,
Tafti Danesh,
Williams Christopher B., Long Timothy E.
Advanced Materials. 2017 29(31).
3D Printing All-Aromatic Polyimides Using Stereolithographic 3D Printing of Polyamic Acid Salts
Herzberger Jana,
Meenakshisundaram Viswanath,
Williams Christopher B., Long Timothy E.
ACS Macro Letters. 2018 7(4). p.493
Functional siloxanes with photo-activated, simultaneous chain extension and crosslinking for lithography-based 3D printing
Sirrine Justin M.,
Meenakshisundaram Viswanath,
Moon Nicholas G.,
Scott Philip J.,
Mondschein Ryan J.,
Weiseman Tobin F.,
Williams Christopher B., Long Timothy E.
Polymer. 2018 152 p.25
Vat photopolymerization of charged monomers: 3D printing with supramolecular interactions
Wilts Emily M.,
Pekkanen Allison M.,
White B. Tyler,
Meenakshisundaram Viswanath,
Aduba Donald C.,
Williams Christopher B., Long Timothy E.
Polymer Chemistry. 2019 10(12). p.1442
Sustainable advances in SLA/DLP 3D printing materials and processes
Maines Erin M.,
Porwal Mayuri K.,
Ellison Christopher J., Reineke Theresa M.
Green Chemistry. 2021 23(18). p.6863
RACI Congress Adelaide
Wentrup Curt
Australian Journal of Chemistry. 2015 68(9). p.1317
Poly(propylene fumarate) stars, using architecture to reduce the viscosity of 3D printable resins
Le Fer Gaëlle,
Luo Yuanyuan, Becker Matthew L.
Polymer Chemistry. 2019 10(34). p.4655
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen Allison M.,
Mondschein Ryan J.,
Williams Christopher B., Long Timothy E.
Biomacromolecules. 2017 18(9). p.2669
Preparation of Biodegradable Cationic Polycarbonates and Hydrogels through the Direct Polymerization of Quaternized Cyclic Carbonates
Yuen Alexander Y.,
Lopez-Martinez Elena,
Gomez-Bengoa Enrique,
Cortajarena Aitziber L.,
Aguirresarobe Robert H.,
Bossion Amaury,
Mecerreyes David,
Hedrick James L.,
Yang Yi Yan, Sardon Haritz
ACS Biomaterials Science & Engineering. 2017 3(8). p.1567
Melt polycondensation of carboxytelechelic polyethylene for the design of degradable segmented copolyester polyolefins
Arrington Anastasia S.,
Brown James R.,
Win Max S.,
Winey Karen I., Long Timothy E.
Polymer Chemistry. 2022 13(21). p.3116
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain Nicholas A.,
Williams Christopher B., Whittington Abby R.
Acta Biomaterialia. 2018 74 p.90
Supercritical Fluid Chromatography with Evaporative Light Scattering Detection (SFC-ELSD) for Determination of Oligomer Molecular Weight Distributions
Sirrine Justin M.,
Ashraf-Khorassani Mehdi,
Moon Nicholas G.,
Mondschein Ryan J., Long Timothy E.
Chromatographia. 2016 79(15-16). p.977
3D‐Printed Functional Polymers and Nanocomposites: Defects Characterization and Product Quality Improvement
Alo Oluwaseun A.,
Mauchline David, Otunniyi Iyiola O.
Advanced Engineering Materials. 2022 24(5).
Modelling Cell Origami via a Tensegrity Model of the Cytoskeleton in Adherent Cells
Wang Lili, Chen Weiyi
Applied Bionics and Biomechanics. 2019 2019 p.1
Poly(ether ester) Ionomers as Water-Soluble Polymers for Material Extrusion Additive Manufacturing Processes
Pekkanen Allison M.,
Zawaski Callie,
Stevenson André T.,
Dickerman Ross,
Whittington Abby R.,
Williams Christopher B., Long Timothy E.
ACS Applied Materials & Interfaces. 2017 9(14). p.12324
