Articles citing this paper

Temperature Dependences of Limiting Activity Coefficients, Henry’s Law Constants, and Derivative Infinite Dilution Properties of Lower (C1–C5) 1-Alkanols in Water. Critical Compilation, Correlation, and Recommended Data

Thermodynamic properties of ethanol and water— III. Description of the different excess functions (gE, hE, cEP) using an empirical model

Condensation of an alkyl chain on 1,7,7-trimethylbicycloheptane: A model for the effect of camphor on lipid membranes

Experimental design and chemometric techniques applied in electronic nose analysis of wood-aged sugar cane spirit (cachaça)

Excess molar enthalpies and excess molar volumes for three- and four-component n-alkane mixtures simulating (n-hexane + n-hexadecane)

Predicting the excess solubility of acetanilide, acetaminophen, phenacetin, benzocaine, and caffeine in binary water/ethanol mixtures via molecular simulation

Extension of the chemical associating lattice model (CALM) to cross association

Challenges and opportunities in improving the production of bio-ethanol

Excess molar volumes and excess molar enthalpies of binary mixtures for 1,2-dichloropropane+2-alkoxyethanol acetates at 298.15K

Temperature dependence of limiting activity coefficients and Henry’s law constants of cyclic and open-chain ethers in water

Thermodynamic properties of binary mixtures containing oxaalkanes

Enthalpy characteristics of L-proline dissolution in certain water–organic mixtures at 298.15 K

Excess molar enthalpies of (benzene + cyclohexane + n-hexane)

A flow-microcalorimetric vessel for solution of small quantities of easily or slightly soluble liquids. Solution of benzene in water at 298.15 K

Continuous thermodynamics of binary associating systems

The physics behind water irregularity

Excess molar enthalpies of (propylene carbonate + an alcohol)

Signal processing and uncertainty in an isothermal titration calorimeter

Solid + liquid phase equilibria, excess enthalpies, and enthalpies of fusion in (2,3-dimethyl-2,3-butanediol + water)

Excess molar enthalpies of ternary and constituent binary systems {1,2-dichloropropane+2-propanol+2-butanol} at T=298.15 K

Controllable preparation and formation mechanism of monodispersed bulk nanobubbles in dilute ethanol-water solutions

Memorial Issue in Honor of Kenneth N. Marsh: Preface

New approach to Tian’s equation applied to heat conduction and liquid injection calorimeters

Excess thermodynamic properties, and for the binary systems {1,2-dichloropropane+2-alkoxyethanols} at T=298.15K

Measurements of excess molar enthalpy and excess molar heat capacity of (1-heptanol or 1-octanol)+(diethylamine or s-butylamine) mixtures at 298.15 K and 0.1 MPa

Excess molar enthalpies of 2-methoxy ethanol+water and 2-ethoxy ethanol+water at 25°C

Excess molar enthalpies of (toluene + n-heptane) and (toluene + methylcyclohexane) using a new variable-volume dilution calorimeter

Measurement and correlation of the excess molar enthalpy of (1-nonanol, or 1-decanol + acetonitrile) mixtures at (298.15, 303.15, and 308.15) K and atmospheric pressure

Enthalpies of mixing of tetrachloroethane with furan, methylfuran, tetrahydrofuran, cyclopentanone and 1,4-dioxane

Topological investigation of the ethanol/water system and its implications for the mode of action of homœopathic medicines

Excess molar enthalpies for (water + a fluoroalkanol)

Experimental study and ERAS modeling of the excess molar enthalpy of (acetonitrile+1-heptanol or 1-octanol) mixtures at (298.15, 313.15, and 323.15)K and atmospheric pressure

Excess enthalpies for (ethanol + water) at 298.15 K and pressures of 0.4, 5, 10, and 15 MPa

Thermodynamic Parameters of the Dissolution of 4-Hydroxy-L-Proline and L-Phenylalanine in Mixed Aqueous Solvents at 298 K

Excess enthalpies and excess volumes of 1-nitropropane +, and 2-nitro-propane +, each of several non-polar liquids

Excess enthalpies and excess volumes of nitromethane +, and nitroethane + each of several non-polar liquids

Enthalpies of mixing by mixture-displacement calorimetry

Production standardization of hand sanitizer spray based on ethanol, isopropanol, and bioethanol to prevent the COVID-19 transmission

Applications of Calorimetry to Nonelectrolyte Solutions

Excess molar volumes and molar enthalpies in the binary mixtures of {x1CH3CHClCH2Cl+x2CH3(CH2) n−1OH} (n=1 to 4) at T=298.15K

Excess molar enthalpy for methanol, ethanol, 1-propanol, 1-butanol + n-butylamine mixtures at 288.15 and 308.15 K at atmospheric pressure

Enthalpies of transfer of tetrabutylammonium bromide from water to highly aqueous water–methanol, –ethanol, –propan-1-ol and –acetonitrile mixtures at 298 K: consideration of the extended coordination model solvation parameters

Limiting partial molar excess enthalpies by flow calorimetry: Some organic solvents in water

Excess molar enthalpies of (tetrahydrofuran + methanol + water) at the temperature 298.15 K and pressure 0.1 MPa

Regression against temperature of gas chromatographic retention data

(Solid + liquid) and (vapor + liquid) phase equilibria and excess enthalpies for (benzene + n-tetradecane), (benzene + n-hexadecane), (cyclohexane + n-tetradecane), and (cyclohexane + n-hexadecane) at 293.15, 298.15, and 308.15 K. Comparison of GmE calculated from (vapor + liquid) and (solid + liquid) equilibria

Excess enthalpies for (ethanol + water) at 398.15, 423.15, 448.15, and 473.15 K and at pressures of 5 and 15 MPa. Recommendations for choosing (ethanol + water) as an HmE reference mixture

A thermoelectric flow enthalpy-increment calorimeter

Partial excess molar properties of water in amphiphile + water systems

Effect of NaCl or KCl on the Excess Enthalpies of Alkanol + Water Mixtures at Various Temperatures and Salt Concentrations

Excess molar enthalpies for (n-hexane + n-hexadecane) and for three- and four-component alkane mixtures simulating this binary mixture

Excess molar enthalpies and volumes of binary mixtures of two hydrofluoroethers with hexane, or benzene, or ethanol, or 1-propanol, or 2-butanone at T=298.15K

Excess enthalpies of the reactive system ethanol + acetic acid + ethyl acetate + water for chemically equilibrium states at 313.15 K

ERAS modeling of the excess molar enthalpies of binary liquid mixtures of 1-pentanol and 1-hexanol with acetonitrile at atmospheric pressure and 288, 298, 313 and 323K

Aqueous charge injection: solvation bonding dynamics, molecular nonbond interactions, and extraordinary solute capabilities

Calorimetry: Its contributions to molecular thermodynamics of fluids

Analysis of {α,ω-Dichloroalkane or α,ω-Dibromoalkane] + Benzene and α,ω-Dichloroalkane + Tetrachloromethane} Mixtures in Terms of Group Contributions

Excess enthalpies of (cyclohexane + nitroethane) near the (liquid + liquid) critical state

Estimation and interpretation of infinite dilution solute–solvent interaction enthalpies in non-electrolyte aqueous solutions

Thermodynamic properties of water in the water-poor region of binary water + alcohol mixtures

Review of experimental and recommended data for the excess molar volumes of 1-alkanol + n-alkane binary mixtures

Excess enthalpies for (butane + chloromethane) at the temperatures (298.15, 323.15, and 348.15) K and pressures (5 and 15) MPa and at the temperature 293.15 K and pressure 15 MPa

Reference materials for calorimetry and differential thermal analysis

Hydrophobic Hydrogels with Fruit‐Like Structure and Functions

Relative Effects of Alcohol and pH on Betacyanin Stability in Aqueous Djulis Extracts and Their Color Qualities after Organic Acid Addition

Molecular hydration: Interfacial supersolidity and its functionality

Hydrogen bond network relaxation resolved by alcohol hydration (methanol, ethanol, and glycerol)