Register      Login
ASEG Extended Abstracts ASEG Extended Abstracts Society
ASEG Extended Abstracts
RESEARCH ARTICLE

Perturbations in 4D marine seismic

Tim Brice, Leif Larsen, Steve Morice and Morten Svendsun

ASEG Extended Abstracts 2001(1) 1 - 4
Published: 2001

Abstract

A new concept for acquiring calibrated towed streamer seismic data is introduced through a new acquisition and processing system. The specification of the new system has been defined by rigorous analysis of the factors that limit the sensitivity of seismic data in 4D studies and imaging. New sensor and streamer technology, new source technology and advances in positioning techniques and data processing have addressed these limitations. Sensitivity analysis revealed that the most significant perturbations to the seismic signal are swell noise and sensor sensitivity variations. Conventional analog groups of hydrophones are designed to suppress swell noise however a new technique for data-adaptive coherent noise attenuation delivers even greater noise suppression for densely spatially sampled single-sensor data. Although modern source controllers provide accurate airgun firing control the signature of an airgun array may vary from shot to shot. This can be due to factors such as changes in the array geometry, air pressure variations, depth variations and wave action. A method for estimating the far-field signature of a source array is the Notional Source Method (proprietary to Schlumberger) which has been steadily refined since its first disclosure. A recent development compensates for variation in source array geometry by monitoring the position and azimuth of each subarray using GPS receivers mounted on the floats. New calibrated positioning and streamer control systems are part of the new acquisition system. Active vertical and lateral streamer control is achieved using steerable birds and positioning uncertainty is reduced through an in-built fully braced acoustic ranging system. Calibrated marine seismic data are achieved through quantifying the source output, the sensor responses and positioning uncertainty. The consequential improvements in seismic fidelity result in better imaging and more reliable 4D analysis.

https://doi.org/10.1071/ASEG2001ab010

© ASEG 2001

Export Citation