Register      Login
Exploration Geophysics Exploration Geophysics Society
Journal of the Australian Society of Exploration Geophysicists
RESEARCH ARTICLE

Seismically constrained petrophysics in the Scarborough area*

F. Hasan Sidi 1 3 Guy Duncan 2 3
+ Author Affiliations
- Author Affiliations

1 Fugro-Jason Australia, 69 Outram Street, West Perth WA 6005, Australia.

2 BHP Billiton Petroleum, PO Box J668, Perth WA 6842, Australia.

3 Corresponding author. Emails: hsidi@fugro-jason.com; guy.duncan@bhpbilliton.com

Exploration Geophysics 38(2) 120-124 https://doi.org/10.1071/EG07015
Submitted: 6 May 2006  Accepted: 30 April 2007   Published: 15 June 2007

Abstract

Despite continued improvements in acoustic logging technology, logs often remain influenced by formation damage and mud-filtrate invasion. Seismic data, another type of measurement that is not affected by drilling, can be integrated in the understanding of incorrect log readings resulting from damage in the immediate vicinity of the wellbore. An iterative workflow of log conditioning, petrophysical interpretation, rock physics modelling, and synthetic-to-seismic matching is applied to ensure the P-sonic and density logs represent the true in situ properties of the rocks. Key to this integration is the development of consistent petrophysical interpretations and rock physics models.

In this paper, we discuss how we arrived at a seismically constrained petrophysical interpretation in the Scarborough gas field in the Exmouth Sub Basin, offshore North West Australia. The logs of these relatively old wells were badly affected by deep invasion of the drilling fluids into the gas sand reservoirs. Conditioning of the well logs was essential to replace the poor quality data. The conditioned logs were used to create an initial rock physics model. Synthetic seismograms were then created using the conditioned logs from the rock physics modelling. Through iterating between petrophysics, rock physics, and synthetic-to-seismic matching we arrived at the final interpretation that is consistent with all available subsurface data. The final synthetic-to-seismic matches for the wells were significantly improved. The integration of different subsurface data types through rock physics modelling significantly reduced the uncertainty in the reservoir properties of the Scarborough gas field.

Key words: invasion, petrophysics, rock physics, fluid substitution, reservoir characterisation.


Acknowledgments

The authors thank the management of BHP Billiton for support and permission to publish this paper.


References

Chi S. , Torres-Verdin C. , Wu J. , and Alpak O.F. , 2004, Assessment of mud-filtrate invasion effects on borehole acoustic logs and radial profiling of formation elastic parameters: SPE paper 90159.

Greenberg, M. L., and Castagna, J. P., 1992, Shear-wave velocity estimation in porous rocks: Theoretical formulation, preliminary verification, and applications: Geophysical Prospecting 40, 195–209.
Crossref | GoogleScholarGoogle Scholar | Schlumberger Ltd, 2006, Oil Field Glossary. Available at: www.glossary.oilfield.slb.com/Display.cfm?Term=long-spacing%20sonic%20log [verified 2 May 2007]

Vásquez, G. F., Dillon, L. D., Varela, C. L., Neto, G. S., Velloso, R. Q., and Nunes, C. F., 2004, Elastic log editing and alternative invasion correction methods: The Leading Edge 23, 20.
Crossref | GoogleScholarGoogle Scholar | Walls J.D. and Carr M.B. , 2001, The use of fluid substitution modeling for correction of mud filtrate invasion in sandstone reservoirs: SEG Expanded Abstracts, 385–387.

Xu, S., and White, R. E., 1995, A new velocity model for clay-sand mixtures Geophysical Prospecting 43, 91–118.
Crossref | GoogleScholarGoogle Scholar |




* *Presented at the Australian Earth Sciences Convention, June 2006, Melbourne.