Register      Login
Exploration Geophysics Exploration Geophysics Society
Journal of the Australian Society of Exploration Geophysicists
RESEARCH ARTICLE

3D inversion of total magnetic intensity data for time-domain EM at the Lalor massive sulphide deposit

Dikun Yang 1 2 Douglas W. Oldenburg 1
+ Author Affiliations
- Author Affiliations

1 Geophysical Inversion Facility, Department of Earth, Ocean and Atmospheric Sciences, University of British Columbia, 2020-2207 Main Mall, Vancouver, British Columbia, Canada V6T 1Z4.

2 Corresponding author. Email: yangdikun@gmail.com

Exploration Geophysics 48(2) 110-123 https://doi.org/10.1071/EG15070
Submitted: 24 July 2015  Accepted: 5 December 2015   Published: 13 January 2016

Abstract

The Lalor deposit is a massive sulphide that is characterised as a stack of conductive ore lenses buried more than 600 m deep. We invert helicopter sub-audio magnetics (HeliSAM) data from Lalor collected using a ground large transmitter loop and an airborne total magnetic intensity (TMI) magnetometer measuring the time-domain electromagnetic (EM) responses. The TMI data are modelled as a projection of the anomalous field onto the earth’s magnetic field. Inversion of these data is considered a significant case study because of two challenges. First, the early-time data are contaminated by the infrastructure on the surface. Second, inverting the data with a uniform half-space as the initial model results in a mathematically acceptable, but non-geologic, model. We create workflows to overcome these difficulties. For the contaminated data, we use a locally refined mesh and a constrained inversion to recover highly conductive cells near the surface that effectively represent the infrastructure. This allows us to safely extract geologic information from the early time data. The non-uniqueness in the inversion is reduced by warm-starting the voxel 3D inversion with a more reasonable initial guess, for example, a block model from geometric inversions. Those procedures greatly improve the inversion image from the surface to the bottom of the target at Lalor, and they can easily be incorporated into the industrial production workflows.

Key words: 3D inversion, Lalor, mineral exploration, time-domain electromagnetic, total magnetic intensity, volcanogenic massive sulphide.


References

Butler, K. E., and Russell, R. D., 2003, Cancellation of multiple harmonic noise series in geophysical records: Geophysics, 68, 1083–1090
Cancellation of multiple harmonic noise series in geophysical records:Crossref | GoogleScholarGoogle Scholar |

Cohen, M. B., Said, R., and Inan, U., 2010, Mitigation of 50–60 Hz power line interference in geophysical data: Radio Science, 45, RS6002
Mitigation of 50–60 Hz power line interference in geophysical data:Crossref | GoogleScholarGoogle Scholar |

Commer, M., Hoversten, G. M., and Um, E. S., 2015, Transient-electromagnetic finite-difference time-domain earth modeling over steel infrastructure: Geophysics, 80, E147–E162
Transient-electromagnetic finite-difference time-domain earth modeling over steel infrastructure:Crossref | GoogleScholarGoogle Scholar |

Davis, K., and Li, Y., 2013, Efficient 3D inversion of magnetic data via octree-mesh discretization, space-filling curves, and wavelets: Geophysics, 78, J61–J73
Efficient 3D inversion of magnetic data via octree-mesh discretization, space-filling curves, and wavelets:Crossref | GoogleScholarGoogle Scholar |

Farquharson, C. G., 2008, Constructing piecewise-constant models in multidimensional minimum structure inversions: Geophysics, 73, K1–K9
Constructing piecewise-constant models in multidimensional minimum structure inversions:Crossref | GoogleScholarGoogle Scholar |

Haber, E., 1997, Numerical strategies for the solution of inverse problems: Ph.D. thesis, University of British Columbia.

Haber, E., Ascher, U., Aruliah, D., and Oldenburg, D., 2000, Fast simulation of 3D electromagnetic problems using potentials: Journal of Computational Physics, 163, 150–171
Fast simulation of 3D electromagnetic problems using potentials:Crossref | GoogleScholarGoogle Scholar |

Jahandari, H., and Farquharson, C. G., 2014, A finite-volume solution to the geophysical electromagnetic forward problem using unstructured grids: Geophysics, 79, E287–E302
A finite-volume solution to the geophysical electromagnetic forward problem using unstructured grids:Crossref | GoogleScholarGoogle Scholar |

Keating, P. B., and Crossley, D. J., 1990, The inversion of time-domain airborne electromagnetic data using the plate model: Geophysics, 55, 705–711
The inversion of time-domain airborne electromagnetic data using the plate model:Crossref | GoogleScholarGoogle Scholar |

Legchenko, A., and Valla, P., 2003, Removal of power-line harmonics from proton magnetic resonance measurements: Journal of Applied Geophysics, 53, 103–120
Removal of power-line harmonics from proton magnetic resonance measurements:Crossref | GoogleScholarGoogle Scholar |

McMillan, M. S., Schwarzbach, C., Haber, E., and Oldenburg, D. W., 2015, 3D parametric hybrid inversion of time-domain airborne electromagnetic data: Geophysics, 80, K25–K36
3D parametric hybrid inversion of time-domain airborne electromagnetic data:Crossref | GoogleScholarGoogle Scholar |

Nabighian, M. N., and Macnae, J. C., 1991, Time domain electromagnetic prospecting methods, in M. N. Nabighian, ed., Electromagnetic methods in applied geophysics, volume 2 – applications: Society of Exploration Geophysicists, 427–520.

Oldenburg, D. W., Haber, E., and Shekhtman, R., 2013, Three-dimensional inversion of multisource time domain electromagnetic data: Geophysics, 78, E47–E57
Three-dimensional inversion of multisource time domain electromagnetic data:Crossref | GoogleScholarGoogle Scholar |

Raiche, A., 2004, Practical 3D airborne EM inversion in complex terranes: ASEG Extended Abstracts, 2004, 1–4.

Rucker, D. F., Loke, M. H., Levitt, M. T., and Noonan, G. E., 2010, Electrical-resistivity characterization of an industrial site using long electrodes: Geophysics, 75, WA95–WA104
Electrical-resistivity characterization of an industrial site using long electrodes:Crossref | GoogleScholarGoogle Scholar |

Saucier, A., Marchant, M., and Chouteau, M., 2006, A fast and accurate frequency estimation method for canceling harmonic noise in geophysical records: Geophysics, 71, V7–V18
A fast and accurate frequency estimation method for canceling harmonic noise in geophysical records:Crossref | GoogleScholarGoogle Scholar |

Smith, R., and Annan, P., 1998, The use of B-field measurements in an airborne time-domain system: Part I. Benefits of B-field versus dB/dt data: Exploration Geophysics, 29, 24–29
The use of B-field measurements in an airborne time-domain system: Part I. Benefits of B-field versus dB/dt data:Crossref | GoogleScholarGoogle Scholar |

Smith, R. S., and Lee, T. J., 2002, The moments of the impulse response: a new paradigm for the interpretation of transient electromagnetic data: Geophysics, 67, 1095–1103
The moments of the impulse response: a new paradigm for the interpretation of transient electromagnetic data:Crossref | GoogleScholarGoogle Scholar |

Sun, J., and Li, Y., 2014, Adaptive Lp inversion for simultaneous recovery of both blocky and smooth features in a geophysical model: Geophysical Journal International, 197, 882–899
Adaptive Lp inversion for simultaneous recovery of both blocky and smooth features in a geophysical model:Crossref | GoogleScholarGoogle Scholar |

Taylor, C., 2014, Mine scale description of the mineralization at the Lalor deposit, Snow Lake, Manitoba, Canada: Proceedings from Exploration for Deep VMS Ore Bodies: The HudBay Lalor Case Study, British Columbia Geophysical Society 2014 Fall Symposium, 1–3.

Tikhonov, A., and Arsenin, V. Y., 1977, Methods for solving ill-posed problems: John Wiley and Sons, Inc.

Um, E. S., Commer, M., Newman, G. A., and Hoversten, G. M., 2015, Finite element modelling of transient electromagnetic fields near steel-cased wells: Geophysical Journal International, 202, 901–913
Finite element modelling of transient electromagnetic fields near steel-cased wells:Crossref | GoogleScholarGoogle Scholar |

Wu, X., and Habashy, T. M., 1994, Influence of steel casings on electromagnetic signals: Geophysics, 59, 378–390
Influence of steel casings on electromagnetic signals:Crossref | GoogleScholarGoogle Scholar |

Yang, D., and Oldenburg, D. W., 2012a, Three-dimensional inversion of airborne time-domain electromagnetic data with applications to a porphyry deposit: Geophysics, 77, B23–B34
Three-dimensional inversion of airborne time-domain electromagnetic data with applications to a porphyry deposit:Crossref | GoogleScholarGoogle Scholar |

Yang, D., and Oldenburg, D. W., 2012b, Three-dimensional inversion of SQUID TEM data at Lalor Lake VMS deposit: SEG Technical Program Expanded Abstracts 2012, Society of Exploration Geophysicists, 1–5.

Yang, D., and Oldenburg, D. W., 2013, 3D conductivity model of the Lalor Lake VMS deposit using ground and airborne EM data: ASEG Extended Abstracts 2013, 23rd Geophysical Conference: Australian Society of Exploration Geophysicists, 1–4.

Yin, C., and Wang, R., 2015, Power line ground resistance detection using helicopter electromagnetic systems: Geophysics, 80, E125–E133
Power line ground resistance detection using helicopter electromagnetic systems:Crossref | GoogleScholarGoogle Scholar |