Register      Login
Australian Journal of Chemistry Australian Journal of Chemistry Society
An international journal for chemical science
RESEARCH ARTICLE

Investigation of Hybrid Materials Based on Polyurethane Modified with Aliphatic Side Chains Combined with Nano-TiO2

Jie Zhang A B , Nanjie Zhang A , Quan Liu A , Haojun Ren A , Pengfei Li A and Kang Yang A
+ Author Affiliations
- Author Affiliations

A School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China.

B Corresponding author. Email: zhangjie1@ecust.edu.cn

Australian Journal of Chemistry 71(1) 47-57 https://doi.org/10.1071/CH17202
Submitted: 11 April 2017  Accepted: 14 August 2017   Published: 20 September 2017

Abstract

In this study, methylene diphenyl diisocyanate (MDI) and polytetrahydrofuran ether diol (PTMG) were used as the raw materials for the synthesis of polyurethane (PU). 1,4-Butanediol, glyceryl monostearate, d-sorbitol tetrastearate, or d-trehalose hexastearate, all containing different amounts of aliphatic side chains, were used as the chain extenders and to introduce C18 side chains into the hard segments of PU, and hybrid materials were then fabricated by mixing PUs with nano-titanium dioxide (nano-TiO2). The effects of the different chain extenders on the surface properties of PU coatings and the hybrid materials were investigated. All the materials were characterised by NMR and FT-IR spectroscopy, differential scanning calorimetry, polarising microscopy, atomic force microscopy, scanning electron microscopy, nanoindentation, and contact angle measurements. The results indicate that incremental changes in the number of side chains decrease the degree of microscale separation from the PU coating and increase the crystallinity of the aliphatic side chains. By introducing the aliphatic side chains, the surface coating presents many tiny protrusions, which enhance the surface roughness and the contact angle. Moreover, both the nano-TiO2 and aliphatic side chain content affect the contact angle of the hybrid materials. The as-obtained superhydrophobic materials exhibit contact angles above 150° with a sliding angle below 3° and present excellent mechanical properties such as hardness and Young’s modulus. The nano-TiO2 was chemically bonded to the molecular chains of PU, resulting in superhydrophobic materials with good acidic and alkaline resistance and anti-stripping properties.


References

[1]  R. N. Wenzel, Ind. Eng. Chem. 1936, 28, 988.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaA28Xkslentg%3D%3D&md5=79d63a4325632269541fa3418ea4caeeCAS |

[2]  L. Feng, S. Li, Y. Li, H. Li, L. Zhang, J. Zhai, Y. Song, B. Liu, L. Jiang, D. Zhu, Adv. Mater. 2002, 14, 1857.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXitlOhsg%3D%3D&md5=be94b50598f39937a42e340822acd080CAS |

[3]  A. Lafuma, D. Quere, Nat. Mater. 2003, 2, 457.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXls1elsL0%3D&md5=aa4cb6c8ee1ed4ea9bf4d82419541425CAS |

[4]  S. H. Hsu, K. Woan, W. Sigmund, Mater. Sci. Eng. Rep. 2011, 72, 189.
         | Crossref | GoogleScholarGoogle Scholar |

[5]  Z. Meng, Q. Wang, X. Qu, C. Zhang, J. Li, J. Liu, Z. Yang, Polymer 2011, 52, 597.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3MXhtlKrur4%3D&md5=3a385b7e0422b10d177bf71359beec48CAS |

[6]  J. Y. Sun, B. Bhushan, RSC Adv. 2012, 2, 12606.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC38Xhs12rsbrN&md5=c63da0e330b0517351434a758092a577CAS |

[7]  S. Subramani, Y. J. Park, Y. S. Lee, J. H. Kim, Prog. Org. Coat. 2003, 48, 71.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXotVCntr0%3D&md5=8c9a5c2e8c467e7cb33ef2ed014b8082CAS |

[8]  A. Usman, K. M. Zia, M. Zuber, S. Tabasum, S. Rehman, F. Zia, Int. J. Biol. Macromol. 2016, 86, 630.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC28Xitl2isbc%3D&md5=1f8048dfdc2166f73a53419d8629a622CAS |

[9]  J. Seyfi, I. Hejazi, S. H. Jafari, H. A. Khonakdar, F. Simon, J. Colloid Interface Sci. 2016, 478, 117.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC28XpsVygu70%3D&md5=a77d6414e1ea33e98aa388f8133449baCAS |

[10]  F. Xue, D. Jia, Y. Li, X. Jing, J. Mater. Chem. A 2015, 3, 13856.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC2MXovVKrtLs%3D&md5=0681cd8c6647402a77efddb445badf4bCAS |

[11]  D. A. Schaeffer, G. Polizos, D. B. Smith, D. F. Lee, S. R. Hunter, P. G. Datskos, Nanotechnology 2015, 26, 055602.
         | Crossref | GoogleScholarGoogle Scholar |

[12]  P. Peng, Q. Ke, G. Zhou, T. Tang, J. Colloid Interface Sci. 2013, 395, 326.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3sXhtFSmtrw%3D&md5=dc7bc646bc300009aa0f3973ad83c4d1CAS |

[13]  R. Taurino, E. Fabbri, M. Messori, F. Pilati, D. Pospiech, A. Synytska, J. Colloid Interface Sci. 2008, 325, 149.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD1cXovFOqsb0%3D&md5=76046d025be5ebea4a94c83787ee2c7eCAS |

[14]  A. Accardo, F. Gentile, F. Mecarini, F. De Angelis, M. Burghammer, E. Di Fabrizio, C. Riekel, Langmuir 2010, 26, 15057.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3cXhtVyrsbrN&md5=d6b516505cb0d82826fb3df4a7146eb1CAS |

[15]  K. K. S. Lau, J. Bico, K. B. K. Teo, M. Chhowalla, G. A. J. Amaratunga, W. I. Milne, G. H. McKinley, K. K. Gleason, Nano Lett. 2003, 3, 1701.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXot12rtLg%3D&md5=68418833160d146d93eb739791be419aCAS |

[16]  D. Han, A. J. Steckl, Langmuir 2009, 25, 9454.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD1MXkslaltrs%3D&md5=f0187cffd076d6817fd7722b832475dbCAS |

[17]  Q. Xie, J. Xu, L. Feng, L. Jiang, W. Tang, X. Luo, C. C. Han, Adv. Mater. 2004, 16, 302.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD2cXisVagu7k%3D&md5=93eb7183b555b69869dc8f2aa883458fCAS |

[18]  S. Wang, J. Shi, C. Liu, C. Xie, C. Wang, Appl. Surf. Sci. 2011, 257, 9362.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3MXpvVKhsb8%3D&md5=5388ff27c71101f3cde0ee7e33e0e776CAS |

[19]  F. Liu, S. Wang, M. Zhang, M. Ma, C. Wang, J. Li, Appl. Surf. Sci. 2013, 280, 686.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3sXpsVGru7o%3D&md5=9645b04d5a98586b71f5528c175fd231CAS |

[20]  D. Kumar, L. Li, Z. Chen, Prog. Org. Coat. 2016, 101, 385.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC28XhsFWisbfM&md5=140a2ff141169b2465636b4f5245a506CAS |

[21]  S. Zhang, L. Cheng, J. Hu, J. Appl. Polym. Sci. 2003, 90, 257.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD3sXmt1Sls7k%3D&md5=6c5c13f6c0b79a91bd56ad9293c15bb8CAS |

[22]  H. Zhang, X. Lv, Y. Li, Y. Wang, J. Li, ACS Nano 2010, 4, 380.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BD1MXhs1alu7vL&md5=4be21013221e32afd2e31ed36086e186CAS |

[23]  R. F. Fedors, Polym. Eng. Sci. 1974, 14, 147.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaE2cXks1CisLo%3D&md5=c2b2770b9313e9489906bfe4c8127905CAS |

[24]  C. P. Christenson, M. A. Harthcock, M. D. Meadows, H. L. Spell, W. L. Howard, M. W. Creswick, R. E. Guerra, R. B. Turner, J. Polym. Sci., Part B: Polym. Phys. 1986, 24, 1401.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DyaL28XkvFyqtbk%3D&md5=6d32751dabd8927b7049374660cce75eCAS |

[25]  H. Shi, Y. Zhao, X. Dong, Y. Zhou, D. Wang, Chem. Soc. Rev. 2013, 42, 2075.
         | Crossref | GoogleScholarGoogle Scholar | 1:CAS:528:DC%2BC3sXit1GrsbY%3D&md5=36afe6446737c1b356443d5db24e8dfeCAS |