
TY  - JOUR
A1  - Lyons, LE 
A1  - Young, TL 
T1  - On the Flat-Band Potential and the Frequency Dispersion of Capacitance and Its Removal in an Normal-Cadmium Telluride in Alkaline Selenide, Polyselenide Photoelectrochemical Cell
JF  - Australian Journal of Chemistry
JO  - Aust. J. Chem.
Y1  - 1986
VL  - 39
IS  - 2
SP  - 347
EP  - 356
KW  - 
UR  - https://doi.org/10.1071/CH9860347 
N2  - When seepage of the electrolyte between the semiconductor crystal and its insulation was prevented, the equivalent series capacitance CS of an n-CdTe|Se2-, Sen2-,OH-|Pt cell was almost independent of frequency (<2% increase of CS per decade decrease of frequency) in the range 104-2 Hz. Attributing CS wholly to the space-charge capacitance resulted in a linear Mott- Schottky plot and this yielded a flat-band potential of -2.0±0.1 V v . s.c.e . and a built-in potential of 1.08±0.06 V. This was consistent with the observed current-voltage curves in both dark and light. Two conditions under which frequency dispersion was observed were (a) electrolyte seepage and (b) surface damage. The insulating techniques which allowed seepage were similar to those of other workers. The effects of these imperfections on the Mott- Schottky plot are considered. Attempts to extract useful information from frequency dispersion data showed that it is difficult or impossible to obtain a unambiguous equivalent circuit solely on the basis of goodness-of-fit of calculated to observed impedances. The ambiguity can be removed only when sufficient information beyond impedance-frequency data is available. For electrodes with seepage, a model due to Tomkiewicz led to the correct value of the built-in potential. 
ER  -

