
%0 Journal Article
%A Earle, DF 
%A McGowan, AA 
%T Evaluation and calibration of an automated rising plate meter for estimating dry matter yield of pasture
%J Australian Journal of Experimental Agriculture
%D 1979/06/01
%V 19
%N 98
%P 337-343
%K 
%R https://doi.org/10.1071/EA9790337
%U https://www.publish.csiro.au/paper/EA9790337 
%X An automatic rising plate meter called the Ellinbank Pasture Meter (EPM) was constructed and evaluated at the Dairy Research Institute (Ellinbank) for measuring the dry matter present on a pasture dominated by green perennial rye grass. The meter readings of pasture height were found to correlate linearly with pasture yield, and the coefficient of variation of calibrations on any one date averaged about 13%. When the data from a large number of calibrations from separate dates were pooled, the coefficient of variation increased to about 18% (RSD 370 kg ha-1). Although there was a high level of repeatability of readings within operators, a substantial degree of variation existed between operators. The diurnal variation in dry matter percentage of pasture had only small effects on the meter readings. The EPM has an advantage over other pasture measuring methods in that its automatic function enables up to one hundred pasture measurements to be made in five minutes. In direct comparison with a manual rising plate meter and a two probe electronic capacitance meter, it was found that there was no significant difference in accuracy between the three meters but the advantages of the EPM are discussed. On perennial rye grass/white clover pastures in an actively growing vegetative state, the EPM has been found to be accurate enough for research purposes yet simple enough for use by farmers and their advisers as an aid to pasture management. 
