
%0 Journal Article
%A Heath, A.M. 
%A Culver, A.L. 
%A Luxton, C.W. 
%T Gathering good seismic data from the Otway Basin
%J Exploration Geophysics
%D 1989/06/01
%V 20
%N 2
%P 247-251
%K 
%R https://doi.org/10.1071/EG989247
%U https://www.publish.csiro.au/paper/EG989247 
%X Cultus Petroleum N.L. began exploration in petroleum permit EPP 23 of the offshore Otway Basin in December 1987. The permit was sparsely explored, containing only 2 wells and poor quality seismic data. A regional study was made taking into account the shape of the basin and the characteristics of the major seismic sequences. A prospective trend was recognised, running roughly parallel to the present shelf edge of South Australia. A new seismic survey was orientated over this prospective trend. The parameters were designed to investigate the structural control of the prospects in the basin. To improve productivity during the survey, north-south lines had to be repositioned due to excessive swell noise on the cable. The new line locations were kept in accordance with the structural model. Field displays of the raw 240 channel data gave encouraging results. Processing results showed this survey to be the best quality in the area. An FK filter was designed on the full 240 channel records. Prior to wavelet processing, an instrument dephase was used to remove any influence of the recording system on the phase of the data. Close liaison was kept with the processing centre over the selection of stacking velocities and their relevance to the geological model. DMO was found to greatly improve the resolution of steeply dipping events and is now considered to be part of the standard processing sequence for Otway Basin data. Seismic data of a high enough quality for structural and stratigraphic interpretation can be obtained from this basin. 
