
%0 Journal Article
%A Engelmark, F.L. 
%T MULTI-COMPONENT SEISMIC&#x2014;THE TOOL FOR ALL REASONS
%J The APPEA Journal
%D 2002/06/30
%V 42
%N 1
%P 587-594
%K 
%R https://doi.org/10.1071/AJ01034
%U https://www.publish.csiro.au/paper/AJ01034 
%X Marine multi-component seismic, known as 4C, is an emerging seismic technology providing improved and sometimes unique solutions to many common problems. In the marine environment the seismic sensors have to be placed on the sea-floor to capture converted or shear wave modes that cannot propagate through liquid media. Although this means increased acquisition cost, the improved information content makes it money well spent to better image and characterise reservoirs.The 4C solutions fall into two major groups of five. First there are the imaging solutions:Improved standard P-wave imaging. Improved converted wave (P-S) resolution in the shallow sediments. Converted wave imaging through gas clouds. Converted wave imaging of low impedance contrast reservoirs. Improved sub-salt and sub-basalt imaging with converted waves. The second group consists of the five characterisation solutions:Improved fracture characterisation by means of P-S waves. Qualitative 4D or time-lapse characterisation of fractured reservoirs with low intrinsic permeability. Improved lithology and fluid characterisation by combining the information in the two wave modes. Improved quantitative time-lapse evaluation of pressure and saturation changes. Improved characterisation of drilling hazards by combined evaluation of the two wave modes. So far the most popular 4C solutions are imaging through gas and improved P-wave imaging of Jurassic reservoirs in the North Sea, for example the Statfjord, Brent and Beryl fields. However, as the technology is developing and maturing, the characterisation solutions will probably be the most common applications of 4C in the near future. 
