
TY  - JOUR
A1  - Ramsden, C.R.T 
A1  - Long, A.S 
T1  - ACQUISITION TECHNOLOGY OPENS UP DIFFICULT DATA AREAS FOR 3D EXPLORATION
JF  - The APPEA Journal
JO  - The APPEA Journal
Y1  - 2002
VL  - 42
IS  - 1
SP  - 607
EP  - 611
KW  - 
UR  - https://doi.org/10.1071/AJ01036 
N2  - 3D seismic technologies have advanced rapidly during the 1990s. The new generation of seismic vessels such as the Ramform design with their massive towing capacities has changed the way in which modern seismic data is acquired. This has resulted in a large increase worldwide in the use of 3D seismic data during the exploration phase because of the reduction in the cost of 3D data. A statistical database has emerged showing that drilling on 3D data will double the commercial success rate compared to drilling on 2D data.Historically, dual-source acquisition has dominated exploration (by comparison to single-source acquisition) due to cost savings associated with the fact that singlesource acquisition implies a geophysical requirement to tow the streamers at half the separation of dual-source acquisition. Data quality associated with single-source acquisition, however, is typically much superior to dualsource data. The ability now to tow 12&#x2013;16 streamers has reduced costs so that single-source acquisition is now cost effective. The surveys using single-source acquisition allow 3D data to be acquired with significantly higher trace densities and crew efficiencies than industry standard, and are called High Density 3D or HD3D. These surveys have benefits of increased fold, improved spatial resolution and improved imaging quality, and can now be routinely conducted, especially in difficult data areas.The North West Shelf of Australia is a difficult data area because of the presence of strong multiple noise trains that often mask or interfere with the primary reflections (Ramdsen et al, 1988). Standard multiple attenuation techniques have had only limited success. HD3D with its higher trace density and 40% improvement in signal-to-noise ratio has resulted in improved data quality in difficult data areas, and should result in data improvements on the North West Shelf as well.Furthermore, the Continuous Long Offset (CLO) recording technique using Ramform technology is a dualvessel operation that has demonstrated significant operational efficiency improvements in long offset (typically deep water/targets) 3D seismic acquisition. Survey turnaround times can be reduced by as much as half of those using conventional techniques. The CLO technique is particularly well suited for deepwater recording. 
ER  -

