
TY  - JOUR
A1  - Shield, C.J. 
T1  - APPLICATION OF RESISTIVITY INVERSION MODELLING TO ENHANCE WATER SATURATION CALCULATIONS FROM WIRELINE LOGS
JF  - The APPEA Journal
JO  - The APPEA Journal
Y1  - 2000
VL  - 40
IS  - 1
SP  - 355
EP  - 366
KW  - 
UR  - https://doi.org/10.1071/AJ99020 
N2  - Water saturation (Sw) values calculated from resistivity or induction logs are often higher than those measured from core-derived capillary pressure (Pc) measurements. The core-derived Sw measurements are commonly applied for reservoir simulation in preference to the log-derived Sw calculations. As it is economically and logistically impractical to core every hydrocarbon reservoir, a method of correlating the core-derived Sw to resistivity/induction logs is required. Two-dimensional resistivity modelling is applied to dual laterolog data to ascertain the applicability of this technique.The Griffin and Scindian/Chinook Fields, offshore Western Australia, have been producing hydrocarbons since 1994 from two early-to-middle Cretaceous reservoirs, the clean quartzose sandstones of the Zeepaard Formation and the overlying glauconitic, quartzose sandstones of the Birdrong Formation. Routine and special core analysis of cores recovered from wells intersecting these two reservoirs creates an excellent data set with which to correlate the good quality wireline log data.A strong relationship is noted between the modelled water saturation from resistivity logs, and the irreducible water saturation measured from core capillary pressure data. Correlation between the core-derived permeability and the invasion diameter calculated from the modelled laterolog data is shown to produce a locally applicable means of estimating permeability from the resistivity modelling results.The evaluation of these data from the Griffin and Scindian/Chinook Fields provides a method for reducing appraisal and development well analysis costs, through the closer integration of core and wireline log data at an earlier stage of the field appraisal phase. 
ER  -

