
TY  - JOUR
A1  - M. Stone, Peter 
A1  - Simsky, Andrew 
T1  - Constructing high resolution DEMs from airborne laser scanner data
JF  - ASEG Extended Abstracts
JO  - ASEG Extended Abstracts
Y1  - 2001
VL  - 2001
IS  - 1
SP  - 1
EP  - 4
KW  - 
UR  - https://doi.org/10.1071/ASEG2001AB136 
N2  - In processing and interpreting the data collected during FALCON airborne gravity gradiometry surveys it is necessary to carefully compensate for topographic features. So that surveys may be performed even in areas where accurate DEMs (Digital Elevation Maps) are unavailable, the FALCON aircraft have been fitted with laser scanners, providing ground return data across a sufficiently wide swathe so that very adequate DEMs over the whole survey area can be produced. Additionally, in one aircraft, a laser profilometer has been fitted adjacent to the scanner, providing independent data to monitor the scanner integrity throughout a survey. This paper briefly describes the scanner features and details the post processing of the scanner ground returns through to gridded DEM format. The intrinsic accuracy of the scanner at low scan angles is demonstrated to be very good, accounting for a ground height error of less than 0.1m standard deviation. Taking into account that DGPS height errors are about 0.15m, the resulting ground height error is estimated as 0.2m standard deviation, which is confirmed by the analysis of height differences in the overlapping areas between adjacent lines. This estimate is characteristic of a lightly vegetated terrain. This level of topographic error will have a negligible impact on our ability to identify target anomalies arising from geological variations. 
ER  -

