Register      Login
Crop and Pasture Science Crop and Pasture Science Society
Plant sciences, sustainable farming systems and food quality
RESEARCH ARTICLE

Design and testing of an intermittent fertilisation method for seeding of maize (Zea mays)

Rui Pan A C D , Zhijun Meng A B , Jianjun Dong https://orcid.org/0000-0002-5579-718X A B * , Yehua Shang A , Hebo Mei A , Bingxin Yan B , Weiqiang Fu A , Nana Gao B , Zhong Xue D * and Zhaoguo Zhang C *
+ Author Affiliations
- Author Affiliations

A Beijing Research Center of Intelligent Equipment for Agriculture, Beijing 100097, P.R. China.

B Beijing Research Center for Information Technology in Agriculture, Beijing 100097, P.R. China.

C Agricultural and Food, Kunming University of Science and Technology, Kunming 650093, P.R. China.

D Agricultural Machinery Institute of Chinese Academy of Tropical Agricultural Sciences, Zhanjiang 524091, P.R. China.


Handling Editor: Youhong Song

Crop & Pasture Science 73(3) 203-213 https://doi.org/10.1071/CP20251
Submitted: 21 July 2020  Accepted: 19 August 2021   Published: 24 January 2022

© 2022 The Author(s) (or their employer(s)). Published by CSIRO Publishing

Abstract

The fertiliser that is applied between maize (Zea mays L.) plants via furrow application cannot be completely absorbed and used because of the wide planting space, resulting in fertiliser wastage and soil pollution. To address this issue, we proposed an intermittent fertilisation method for single maize plant seeding, and designed a fertilisation device that can control the intermittent timing and duration of fertiliser application. A simple indoor bench test was done to verify the feasibility of the device. A synchronised control model of the seed and fertiliser was also established. Thus, a quantitative precision intermittent fertilisation system for a single maize plant was developed. The technique was integrated and applied in a current mainstream quantitative precision seeder and fertiliser feeder for maize in field trials. The trial results showed that the average centre distance between the seed and the fertiliser was 5–8 cm and the qualification rate was >90%. The effective length of fertilisation was about one-third of plant spacing, and the largest coefficient of variation was 12.37%. In conclusion, the present quantitative precision interval fertilisation system can feed and apply fertiliser to the predetermined fertiliser site of maize plants, realising the ‘one seed and one fertiliser’ seeding and fertilisation mode, which reduced the fertiliser application amount and increased the fertiliser utilisation rate.

Keywords: fertiliser utilisation, fixed-point fertilisation, intermittent fertilisation, maize, precision sowing, seed and fertiliser, synchronous control, Zea mays.


References

Burke WJ, Frossard E, Kabwe S, et al. (2019) Understanding fertilizer adoption and effectiveness on maize in Zambia. Food Policy 86, 101721
Understanding fertilizer adoption and effectiveness on maize in Zambia.Crossref | GoogleScholarGoogle Scholar | 31417206PubMed |

Chen C, Li QY, Liu JF, Wang RX (2012) Analysis and control measures of the environmental impact by heavy fertilizer use. South to-North Water Diversion and Water Science & Technolog 2, 102–104.

Chen YP, Long H, Liu ZJ (2015) Actuality and measures of fertilization technology and machinery in China. Journal of Agricultural Mechanization Research 4, 255–260.

Hu GM (2010) ‘Analysis and simulation of granular system by discrete element method using EDEM.’ (Wuhan University of Technology Press: Wuhan, China)

Hu H, Li H W, Wang QJ, et al. (2016) Design and experiment of targeted hole-pricking and deep-application fertilizer applicator between corn rows. Transactions of the Chinese Society of Agricultural Engineering 24, 26–35.

Li SK, Zhao J, Dong ST, et al. (2017) Advances and prospects of maize cultivation in China. Scientia Agricultura Sinica 11, 1941–1959.

Link J, Graeff S, Batchelor WD, et al. (2007) Evaluating the economic and environmental impact of environmental compensation payment policy under uniform and variable-rate nitrogen management. Agricultural Systems 1, 135–153.

Liu Q (2017) Spatio-temporal changes of fertilization intensity and environmental safety threshold in China. Transactions of the Chinese Society of Agricultural Engineering 6, 214–221.

Ma CL, Wu CC, Zhang SH, et al. (2004) Decision making method for variable-rate fertilization based on data envelopment analysis and artificial neural network. Transactions of the Chinese Society of Agricultural Engineering 2, 152–155.

Ma XL, Fan GB, Li YY, et al. (2011) Establishment of precision fertilization decision-making model and database system. Transactions of the Chinese Society of Agricultural Machinery 5, 193–197.

Maleki MR, Mouazen AM, De Ketelaere BD, et al. (2008) On-the-go variable-rate phosphorus fertilisation based on a visible and near-infrared soil sensor. Biosystems Engineering 99, 35–46.
On-the-go variable-rate phosphorus fertilisation based on a visible and near-infrared soil sensor.Crossref | GoogleScholarGoogle Scholar |

Li M, Song Y, Ji YF, et al. (2006) Technical specification of quality evalution for fertilizing machinery. NY/T 1003-2006. Agricultural Industry Standard of the People’s Republic of China.

Sela S, van Es HM, Moebius-Clune BN, et al. (2018) Dynamic model-based recommendations increase the precision and sustainability of N fertilization in midwestern US maize production. Computers and Electronics in Agriculture 153, 256–265.
Dynamic model-based recommendations increase the precision and sustainability of N fertilization in midwestern US maize production.Crossref | GoogleScholarGoogle Scholar |

Tamás K, Jóri IJ, Mouazen AM (2013) Modelling soil–sweep interaction with discrete element method. Soil and Tillage Research 134, 223–231.
Modelling soil–sweep interaction with discrete element method.Crossref | GoogleScholarGoogle Scholar |

Tola E, Kataoka T, Burce M, et al. (2008) Granular fertiliser application rate control system with integrated output volume measurement. Biosystems Engineering 101, 411–416.
Granular fertiliser application rate control system with integrated output volume measurement.Crossref | GoogleScholarGoogle Scholar |

Ucgul M, Fielke JM, Saunders C (2014) 3D DEM tillage simulation: validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil. Soil and Tillage Research 144, 220–227.
3D DEM tillage simulation: validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil.Crossref | GoogleScholarGoogle Scholar |

Wan L (2018) Design and test of maize interrow hole fertilizer. MA Thesis, Anhui Agricultural University, Anhui, China.

Yang GH, Li XW, Cheng L, et al. (2006) Study on effects of plant densities on the yield and the related characters of maize hybrids. Acta Agriculturae Boreali-occidentalis Sinica 5, 57–60.

Yang YM, Jia K, Zhu YF, et al. (2011) Effects of compound fertilizer with different nutrition ratio on the yield and economic benefit of maize. Journal of Hebei Agricultural Sciences 4, 36–38.

Yu H, Liu D, Chen G, et al. (2010) A neural network ensemble method for precision fertilization modeling. Mathematical and Computer Modelling 51, 1375–1382.
A neural network ensemble method for precision fertilization modeling.Crossref | GoogleScholarGoogle Scholar |

Zhu ZL, Jin JY (2013) Fertilizer use and food security in China. Plant Nutrition and Fertilizer Science 2, 259–273.