
%0 Journal Article
%A Peterson, A. D. 
%A Oldham, C. M. 
%A Gherardi, S. G. 
%T Comparison of the 'Measure as you Grow' technique for measuring fibre diameter profiles between two laboratories and two sample sites
%J Science Access
%D 2004/01/01
%V 1
%N 1
%P 132-135
%K staple profile, fibre diameter, OFDA2000, fibre measurement
%R https://doi.org/10.1071/SA0401034
%U https://www.publish.csiro.au/paper/SA0401034 
%X Fibre diameter (FD) was measured on 2 mm snippets of wool from the base of staples and compared between 2 laboratories and 2 sample sites for 6 flocks. The base snippets were taken at regular intervals during the year, and the FD was plotted against staple length to produce a FD profile. There was a mean bias of 0.4 µm between laboratories in estimating the mean FD of the profile. The hipbone sample site was 0.96 µm broader than the mid-side, although this differed significantly between flocks. The staple length estimates between both laboratories were strongly correlated (research2 = 0.99). There was no difference in the precision of estimating FD profile between the sample sites. The confidence limit of a mean FD estimate at a point along the staple profile was ± 0.54 µm within a sample site. The 'measure as you grow' technique for estimating FD profile parameters appears precise enough to be used as a guide to growers. However, other alternatives need to be investigated which provide a more accurate and precise estimate of the FD profile. 
