Register      Login
The APPEA Journal The APPEA Journal Society
Journal of Australian Energy Producers
RESEARCH ARTICLE

Methodology for assessing original gas in place and estimated ultimate recovery from a tight marine formation using hydraulic fracture stimulation modelling

Matthew Goldman A and Raymond L. Johnson Jr. B C
+ Author Affiliations
- Author Affiliations

A Geological Survey of Queensland, Level 3, 1 William Street, Brisbane, Qld, 4000, Australia.

B Unconventional Reservoir Solutions, 168 Ninth Avenue, St Lucia, Qld, 4067, Australia.

C Corresponding author. Email: rayj@unconreservoirs.com.au

The APPEA Journal 57(1) 136-149 https://doi.org/10.1071/AJ16176
Accepted: 8 February 2017   Published: 29 May 2017

Abstract

Operators in Australia are currently exploring similar geological settings to the tight marine unconventional petroleum systems of the United States, in the hope of emulating the North American success. This study sets out the methodology and models required to undertake an analysis of a tight marine source and reservoir rock to estimate its production potential, with particular attention given to modelling the required hydraulic fracture stimulation. The project target formation is the tight marine Log Creek Formation, which forms the source rock to the overlying proved Gilmore Gas Field in the Adavale Basin in Central Queensland. The Marcellus Formation in the Appalachian Basin in the Northeastern United States is an assumed analogue to the Adavale Basin; data from the Marcellus Formation was used when unavailable for the Adavale Basin.

Initially, formation evaluation was undertaken to determine key parameters such as total organic carbon (TOC), mineralogy and stress regime. Once the formation had been characterised, a fracture stimulation model was built to determine the hydraulic fracture stimulation treatment design, which optimised the lateral landing depth, hydraulic fracture spacing, conductivity and half‐length. In particular, it is important to determine the lateral landing depth and fracture half‐length with confidence, as they will define the stimulated reservoir volume (SRV), which sets the upper boundary on original gas in place (OGIP) and estimated ultimate recovery (EUR) of gas. OGIP was estimated using a probabilistic model incorporating an adjustment for absorbed gas volume. Finally, a reservoir simulation was undertaken using a single well composite multi‐fracture model to obtain EUR.

Keywords: Adavale Basin, horizontal well, hydraulic fracturing, lateral landing depth, Log Creek Formation, unconventional resources.

Matthew Goldman is a Geoscientist at the Geological Survey of Queensland. Matthew completed his first degree in Theoretical Physics from York University in the UK in 1997. After graduating, he worked as a statistician for the UK Health Department before qualifying as a high school science teacher. Matthew immigrated to Australia in 2007, and in 2009 he joined the Geological Survey of Queensland where he has worked for the past eight years. In November 2016, Matthew completed his Masters in Petroleum Engineering through the joint program of the University of Queensland and Heriot Watt University in Edinburgh, Scotland.

Raymond (Ray) L. Johnson, Jr. is presently Professor of Well Engineering and Production Technology at the University of Queensland. In addition, he is Principal at Unconventional Reservoir Solutions, serves as Adjunct Associate Professor at the University of Adelaide and has been an Adjunct Fellow at the University of Queensland. He has a PhD in mining engineering, a MSc in petroleum engineering, a Graduate Diploma in Information Technology and a BA in Chemistry. Ray is active in the Society of Petroleum Engineers (SPE), was past chair of the SPE Queensland Section and Co-Chair of the SPE Unconventional Reservoir Conference and Exhibition Asia Pacific (2013 and 2015). He has over 36 years of experience and has been involved in the technical committees for numerous SPE technical conferences focusing on reservoir geomechanics, hydraulic fracture design execution and evaluation, and unconventional resource development.


References

Ambrose, R.J., Hartman, R.C., and Diaz-Campos, M. (2012). Shale Gas-in-Place Calculations Part I: New Pore-Scale Considerations. Society of Petroleum Engineers. , .
Shale Gas-in-Place Calculations Part I: New Pore-Scale Considerations.Crossref | GoogleScholarGoogle Scholar |

Anderson, D.M., Nobakht, M., Moghadam, S., and Mattar, L. (2010). Analysis of Production Data from Fractured Shale Gas Wells. Society of Petroleum Engineers. , .
Analysis of Production Data from Fractured Shale Gas Wells.Crossref | GoogleScholarGoogle Scholar |

Barree, R.D. (1983). A Practical Numerical Simulator for Three-Dimensional Fracture Propagation in Heterogeneous Media. Society of Petroleum Engineers. , .
A Practical Numerical Simulator for Three-Dimensional Fracture Propagation in Heterogeneous Media.Crossref | GoogleScholarGoogle Scholar |

Baxter, H., Mittrup, D., and Haest, M. (2015). Advances in Infrared Spectroscopic Sensing Towards Improvements in Geological and Geomechanical Models. ISRM13, 13th International Congress of Rock Mechanics, Montreal, Canada.

Boreham, C.J., and de Boer, R.A. (1998). Origin of Gilmore Gas and Oil, Adavale Basin, Central Queensland. The APPEA Journal 38, 399–420.
| 1:CAS:528:DyaK1MXmsVCqtL8%3D&md5=17aa329a9a7dd0b8c6653b017d4ac9adCAS |

Brown, M., Ozkan, E., Raghavan, R., and Kazemi, H. (2009). Practical Solutions for Pressure-Transient Responses of Fractured Horizontal Wells in Unconventional Shale Reservoirs. Society of Petroleum Engineers. , .
Practical Solutions for Pressure-Transient Responses of Fractured Horizontal Wells in Unconventional Shale Reservoirs.Crossref | GoogleScholarGoogle Scholar |

BMR [Bureau of Mineral Resources] (1987). Australian Petroleum Accumulations Report 4, Adavale Basin, Queensland,. Department of Primary Industries and Energy. (Australian Government Publishing Service: Canberra).

Draper, J.J., Boreham, C.J., Hoffmann, K.L., and McKellar, J.L. (2004). Devonian Petroleum Systems in Queensland, presented at PESA Eastern Australian Basins Symposium II, Adelaide, 2004.

EIA (2011). Review of Emerging Resources: U.S.Shale Gas and Shale Oil Plays, US Department of Energy, Washington, D.C.

EIA (2013). Technically Recoverable Shale Oil and Shale Gas Resources: An Assessment of 137 Shale Formations in 41 Countries Outside the United States, US Department of Energy, Washington, D.C.

Gamero-Diaz, H., Miller, C., and Lewis, R. (2013a). sCore: A Mineralogy Based Classification Scheme for Organic Mudstones. Society of Petroleum Engineers. , .
sCore: A Mineralogy Based Classification Scheme for Organic Mudstones.Crossref | GoogleScholarGoogle Scholar |

Gamero-Diaz, H., Miller, C., Lewis, R., and Fuentes, C. (2013b). Evaluating the Impact of Mineralogy on Reservoir Quality and Completion Quality of Organic Shale Plays. Search and Discovery, Article #41221, presented at the AAPG Rock Mountain Section Meeting, Salt Lake City, Utah, US.

Geological Survey of Queensland (2016). HyLogging. A New Concept in Logging Core (Broacher). Available at: https://publications.qld.gov.au/dataset/7be8b10f-97ab-4d82-b2d7-51c4e3519a96/resource/43b755ad-38e0-420f-92c9-67996eb03abd/download/hylogging-core.pdf

Grigorescu, M. (2012). Mineralogy of the north-eastern Bowen Basin and North-eastern Surat basin, Queensland, Queensland Geological Record 2011/02.

Johnson, R.L. Jr. (2016). Improving Diagnostic Fracture Injection Testing for in Situ Stress Profiling. In International Conference on Geomechanics, Geo-energy and Geo-resources (IC3G 2016), Melbourne, Australia, 28–29 September 2016 (3 Media Group: Melbourne).

Johnson, R., and Greenstreet, C. (2003). Managing Uncertainty Related to Hydraulic Fracturing Modeling in Complex Stress Environments with Pressure-Dependent Leakoff. Society of Petroleum Engineers. , .
Managing Uncertainty Related to Hydraulic Fracturing Modeling in Complex Stress Environments with Pressure-Dependent Leakoff.Crossref | GoogleScholarGoogle Scholar |

Johnson, R.L., and Titus, L. (2014). Observations and Recommendations From a Hydraulic Fracturing Case in the Pre-Cambrian Lawn Hill Shale, Isa Superbasin, Australia. Society of Petroleum Engineers. , .
Observations and Recommendations From a Hydraulic Fracturing Case in the Pre-Cambrian Lawn Hill Shale, Isa Superbasin, Australia.Crossref | GoogleScholarGoogle Scholar |

Johnson, R.L., Glassborow, B., Scott, M.P., Pallikathekathil, Z.J., Datey, A., and Meyer, J. (2010). Utilizing Current Technologies to Understand Permeability, Stress Azimuths and Magnitudes and their Impact on Hydraulic Fracturing Success in a Coal Seam Gas Reservoir. Society of Petroleum Engineers. , .
Utilizing Current Technologies to Understand Permeability, Stress Azimuths and Magnitudes and their Impact on Hydraulic Fracturing Success in a Coal Seam Gas Reservoir.Crossref | GoogleScholarGoogle Scholar |

Lehman, L.V., Andress, R., Mullen, M., and Johnson, R.L. (2015). Delaware Basin Bone Springs. A Study of the Evolving Completion Practices to Create an Economically Successful Play. Society of Petroleum Engineers. , .
Delaware Basin Bone Springs. A Study of the Evolving Completion Practices to Create an Economically Successful Play.Crossref | GoogleScholarGoogle Scholar |

Luffel, D.L., Hopkins, C.W., and Schettler, P.D. (1993). Matrix Permeability Measurement of Gas Productive Shales. Society of Petroleum Engineers. , .
Matrix Permeability Measurement of Gas Productive Shales.Crossref | GoogleScholarGoogle Scholar |

McKillop, M.D., McKellar, J.L., Draper, J.J. and Hoffmann, K.L. (2007). The Adavale Basin: Stratigraphy and depositional environments. Special Publication-Northern Territory Geological Survey, 82–107.

Mullen, M., Roundtree, R., and Barree, B. (2007). A Composite Determination of Mechanical Rock Properties for Simulation Design (What to do when you don’t have a sonic log). Society of Petroleum Engineers. , .
A Composite Determination of Mechanical Rock Properties for Simulation Design (What to do when you don’t have a sonic log).Crossref | GoogleScholarGoogle Scholar |

National Energy Technology Laboratory (2011). A Comparative Study of the Mississippian Barnet Shale, Fort Worth Basin, and Devonian Marcellus Shale, Appalachian Basin, US Department of Energy, DOE/NETL-2011/1478.

Passmore, V.L., and Sexton, M.J. (1984). The Structural Development and Hydrocarbon Potential of Palaeozoic Source Rocks in the Adavale Basin Region. The APPEA Journal 24, 393–411.
| 1:CAS:528:DyaL2cXlslCjtb8%3D&md5=193ce9ee7c46771df7e08cf7924426baCAS |

Phillips Petroleum Co. (1964). Well Completion Report, Gilmore No. 1, Queensland Department of Natural Resources and Mines, QDEX Company Report Number 1586.

Reynolds, S.D., Mildren, D.S., Hillis, R.R., and Meyer, J.J. (2006). Constraining stress magnitudes using petroleum exploration data in the Cooper-Eromanga Basins, Australia. Elsevier Tectonophysics 415, 123–140.
Constraining stress magnitudes using petroleum exploration data in the Cooper-Eromanga Basins, Australia. ElsevierCrossref | GoogleScholarGoogle Scholar |

Sondergeld, C.H., Newsham, K.E., Comisky, J.T., Rice, M.C., and Rai, C.S. (2010). Petrophysical Considerations in Evaluating and Producing Shale Gas Resources. Society of Petroleum Engineers. , .
Petrophysical Considerations in Evaluating and Producing Shale Gas Resources.Crossref | GoogleScholarGoogle Scholar |

USGS (2011). Assessment of Undiscovered Oil and Gas Resources of the Devonian Marcellus Shale of the Appalachian Basin Province, 2011. USGS Fact Sheet 2011–3092, Aug 2011. Available at: https://pubs.usgs.gov/fs/2011/3092/ [Verified 14 February 2017].

Walton, I., and McLennan, J. (2013). The Role of Natural Fractures in Shale Gas Production. In ‘Effective and Sustainable Hydraulic Fracturing.’ (Ed. R. Jeffrey), InTech. Available from: http://www.intechopen.com/books/effective-and-sustainable-hydraulic-fracturing/the-role-of-natural-fractures-in-shale-gas-production [Verified 14 February 2017].

Warpinski, N.R., and Branagan, P.T. (1989). Altered-Stress Fracturing. Society of Petroleum Engineers. , .
Altered-Stress Fracturing.Crossref | GoogleScholarGoogle Scholar |

Wylie, M., Gregory, A., and Gardner, G. (1956). Elastic Wave Velocities in Heterogeneous and Porous Media. Geophysics 21, 41–70.
Elastic Wave Velocities in Heterogeneous and Porous Media.Crossref | GoogleScholarGoogle Scholar |

Yu, W., Sepehrnoori, K., and Patzek, T.P. (2014). Evaluation of Gas Adsorption in Marcellus Shale. Society of Petroleum Engineers. , .
Evaluation of Gas Adsorption in Marcellus Shale.Crossref | GoogleScholarGoogle Scholar |

Yu, W., Wu, K., and Sepehrnoori, K. (2015). An Integrated Approach to Optimize Production in Marcellus Shale Gas Reservoirs. Society of Petroleum Engineers. , .
An Integrated Approach to Optimize Production in Marcellus Shale Gas Reservoirs.Crossref | GoogleScholarGoogle Scholar |

Zagorski, W.A., Bowman, D.C., and Wrightstone, G.R. (2011). An overview of Some Key Factors Controlling Well Productivity in Core Areas of the Appalachian Basin Marcellus Shale Play. Search and Discovery, Article #110147, Presented at the AAPG Annual Convention and Exhibition, Houston, Texas, USA.

Zoback, M.D., Moos, D., Mastin, L., and Anderson, R.N. (1985). Well Bore Breakout and in Situ Stress. USGS Staff-Published Research, Paper 458, http://digitalcommons.unl.edu/usgastaffpub/458.